1.沖擊試驗低溫槽 型號:DP-DWC-40

型號 DP-DWC-40 DP-DWC-60A DP-DWC-80 DP-DWC-100

溫度范圍 30～-40℃ 30～-60℃ 30～-80℃ 30～-100℃

控溫度 ±0.5℃

作槽 120mm*120mm*70mm（可根據用戶要求定做）

可裝式樣數量 ＞60（僅對金屬夏比缺口沖擊試驗）

作介質 無水乙醇（酒槽）

電源供電 220V～240V,50HZ

外形尺寸 910mm*500mm*870mm

凈重 約90kg

DP-DWC-40型沖擊試驗低溫槽操作簡單方便，無化學污染、無噪音、無振動、無磨損、體積小、重量輕、操作簡單、控制度、可連續作等特點，是金屬材料低溫沖擊試驗中的理想的試樣冷卻、保溫設備。DWC型同時亦可用于其他低溫檢測和試驗作。是根據GB/T229-2007《金屬夏比缺口沖擊試驗方法》中對低溫裝置的要求而研制開發的壓縮機制冷設備。

2.自動壓樣機  型號:DP-600KN

壓樣機是X射線熒光光譜儀的配套設備。DP-400KN，DP-600KN型壓樣機采用內模壓樣方式，操作方便、效率、性能穩定可靠。 
產品結構特點 Characteristics of the Products

●內模式壓樣，壓頭行程100毫米?？捎糜谂鹚?、鋼環、鋁杯、塑環等各類壓樣方式，適用范圍廣，作穩定。 Adopted internal mould sample-press, pressure head travel is 100 mm. The products can be used for various kinds of sample-pressing methods such as boric acid, steel ring, aluminum cup, plastic ring etc., with characteristics of broad scope of application and stable working.
●*的緩加壓、慢退模程序更有利于保證壓樣合格率、提壓樣樣量。 With specific programs of slow pressurization and slow mould-release, the products are favorable to ensure acceptance rate of sample-press, improve sample quality of sample-press.
●特別設計的集成液壓管道模塊不僅使組裝更加方便，而且減少了漏油機會。 With integrated hydraulic pipe block being specially designed, it not only makes assembling easier, but also reduces the chance of oil leak.
●加厚的油箱蓋板使油泵和電磁閥的動作噪音更小。 With thickening oil-tank cover-board, it makes acting noise of oil pump and solenoid valve smaller.
●采用由可控硅集成的固態模塊替代傳統的接觸器避免了由于電機頻繁啟動而引起的各類故障，有效提了該分的使用壽命。 Adopted solid-state block of integrated silicon controlled to replace traditional contactor, it avoids various kinds of troubles caused by frequent starting of motor and efficiently increases service life of this section.
●繼電器控制分采用印刷板焊接結構，減少了控制箱的接線，提了電器控制的可靠性。 The Control section of relay is adopted the welding structure of printed circuit board, it reduces wiring of control box, improves reliability of electric control.
●控制電源采用低壓24V，作更加安可靠。 Control power source is fully adopted low-voltage of 24V, which makes work safer and more reliable.
●結構緊湊，占地面積小。 With compacting structure, small floor space

術參數
壓片壓力60tf  (噸)
模具  硼酸、鋼環、鋁杯和塑料環
壓頭行程100mm
壓片保壓時間0~999 秒
供電電源380V
額定率1.3kw
外型尺寸1180x720x530mm
凈重420Kg

3.CNC劃片切割機/劃片切割機 型號：DP/DPJ-400

產品簡介：它主要適用于各種晶體、陶瓷、玻璃、礦石、金屬等材料的劃片和切割。本機可用計算機（附帶MTI操作軟件）或單片機行控制，允許您自己編制程序，行切割。步電機定位度可達到0.01mm，樣品作臺可行360°旋轉，并配有十字夾具（90°定位模）、真空吸盤，是實驗室及生產單位理想的切割設備之。

4.微型臺式真空泵/臺式真空泵 型號：DP/WZ-II

微型臺式真空泵是為化學檢驗、臨床檢驗、生物程、冶金、環保等實驗室設計制的。該真空減壓裝置可行吸液、排液或減壓，廣泛應用于離心后上清液和沉淀物的提取、制備單克隆抗體、融合后上清液換液、酶聯免疫吸附的多孔塑料板的洗滌。

主要參數:

5.電火花檢漏儀/電火花檢測儀/電火花測試儀 型號：DP-D1-C

 注：頁面價格只是配件價格或產品庫存數量，并非產品價格  具體價格面議  如給您帶來不便請諒解